Show Pagp - Cisco Catalyst 3560-X Command Reference Manual

Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands

show pagp

Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
OL-21522-02
Downloaded from www.Manualslib.com
Use the show pagp user EXEC command to display Port Aggregation Protocol (PAgP) channel-group
information.
show pagp [channel-group-number] {counters | dual-active | internal | neighbor} [ | {begin |
exclude | include} expression]]
channel-group-number
counters
dual-active
internal
neighbor
| begin
| exclude
| include
expression
User EXEC
Release
12.2(53)SE2
You can enter any show pagp command to display the active channel-group information. To display the
nonactive information, enter the show pagp command with a channel-group number.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output are appear.
This is an example of output from the show pagp 1 counters command:
Switch> show pagp 1 counters
Information
Port Sent Recv
--------------------------------------
Channel group: 1
Gi1/0/1 45 42
Gi1/0/2 45 41
manuals search engine
(Optional) Number of the channel group. The range is 1 to 48.
Display traffic information.
Display the dual-active status.
Display internal information.
Display neighbor information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Flush
Sent Recv
0 0
0 0
Catalyst 3750-X and 3560-X Switch Command Reference
show pagp
2-731