Show Pagp - Cisco Catalyst 2960-X Command Reference Manual

show pagp

show pagp
To display Port Aggregation Protocol (PAgP) channel-group information, use the show pagp command in
EXEC mode.
show pagp [channel-group-number] {counters| dual-active| internal| neighbor}
Syntax Description
channel-group-number
counters
dual-active
internal
neighbor
Command Default
None
Command Modes
User EXEC
Privileged EXEC
Command History
Release
Cisco IOS 15.0(2)EX
Usage Guidelines
You can enter any show pagp command to display the active channel-group information. To display the
nonactive information, enter the show pagp command with a channel-group number.
Examples This is an example of output from the show pagp 1 counters command:
Switch> show pagp 1 counters
Port
----------------------------------------
Channel group: 1
Gi1/0/1
Gi1/0/2
This is an example of output from the show pagp dual-active command:
Switch> show pagp dual-active
PAgP dual-active detection enabled: Yes
PAgP dual-active version: 1.1
Catalyst 2960-X Switch Layer 2 Command Reference, Cisco IOS Release 15.0(2)EX
64
(Optional) Number of the channel group. The range is 1 to 24.
Displays traffic information.
Displays the dual-active status.
Displays internal information.
Displays neighbor information.
Information Flush
Sent Recv Sent Recv
45 42 0 0
45 41 0 0
Modification
This command was introduced.
Layer 2 Commands
OL-29043 -01