Centering ("Centering/Image Shift Mode") - Oce OP1030 Operation Manual

1-3 Using the Scanner Function
(8) Centering
When the ratio for the length and width of the scan image does not fit, it may cause the margin being
enlarged. With this mode, you can center the image on the scanning image when this function is set to
"ON". If this function is set to set to "ON" in the initial mode, all of the originals to be scanned will be
centered on scanning image.
• When the transmitting size that the ratio of the original size and length/width is different is
("Centering/Image shift mode")
* Factory default setting: OFF
* "Centering" setting is available by KM-3035/4035/5035/4530/5530/6330/7530/C850/C850D/C2630/
C2630D.
selected.
Centering "OFF"
Scanning
area
Page 1-23
Scanning
area
Centering "ON"