Verifying The M7I Router Parts Received; Table 55: Generic Inventory Of Router Components Installed In The M7I; Table 56: Accessory Box Parts List - Juniper M7i Hardware Manual

Verifying the M7i Router Parts Received

Copyright © 2019, Juniper Networks, Inc.
A packing list is included in each shipment. Check the parts in the shipment against the
items on the packing list. The packing list specifies the part numbers and descriptions of
each part in your order.
If any part is missing, contact a customer service representative.
A fully configured router contains the router chassis with installed components, listed in
Table 55 on page 107, and an accessory box, which contains the parts listed in
Table 56 on page 107. The parts shipped with your router can vary depending on the
configuration you ordered.
Table 55: Generic Inventory of Router Components Installed in the M7i Chassis
Component
PIC
FIC
Routing Engine
Midplane
CFEB or CFEB-E
Fan tray
Power supply
Mounting brackets
Blank panels for slots without components

Table 56: Accessory Box Parts List

Part
Screws, Screw, Pan hd, Phil, 12-24 x 1/2", self-tapping
Screws, Flat Hd, Phil, 5 x 10.5mm Long, 1.6mm Pitch,
self-tapping
Terminal lugs, 16-AWG to 14-AWG, #6 stud, ring terminal,
vinyl insulated
Terminal fork lugs, 14-AWG, #6, 0.25 Wide, insulation
strain relieved, for DC power cables
Chapter 15: Unpacking the M7i
Quantity
Up to 4
1 (2-port Fast Ethernet or 1-port Gigabit
Ethernet)
1
1
1
1
1 or 2
2
Depends on router configuration
Quantity
4
4
2
9 (2 per power supply)
107