Verifying The Router Parts Received - Juniper MX204 Hardware Manual

MX204 3D Universal Edge Router Hardware Guide
Related
Documentation
Verifying the MX204 Router Parts Received
60
Remove the accessory box, and verify the contents against the parts inventory on the
4.
label attached to the carton.
Pull out the packing material holding the router in place.
5.
Verify the contents of the carton against the packing list included with the router.
6.
Save the shipping carton and packing materials in case you later need to move or ship
7.
the router.
MX204 Site Preparation Checklist on page 35
MX204 Installation Summary on page 63
Tools and Parts Required to Unpack the MX204 Router on page 59
Verifying the MX204 Router Parts Received on page 60
A packing list is included in each shipment. Check the parts in the shipment against the
items on the packing list. The packing list specifies the part numbers and descriptions of
each part in your order.
If any part is missing, contact a customer service representative.
A fully configured router contains the router chassis with installed components, listed in
Table 32 on page 60, and an accessory box, which contains the parts listed in
Table 33 on page 61. The parts shipped with your router can vary depending on the
configuration you ordered.
Table 32: Parts List for a Fully Configured Router
Component
Chassis
AC or DC power supply
Fan module
Quick start installation instructions
Blank panels for slots without components installed
Quantity
1
2
3
1
One blank panel for each slot not
occupied by a component
Copyright © 2018, Juniper Networks, Inc.