The Idp General Screen - ZyXEL Communications USG-300 - V2.20 ED 2 Manual

34.2 The IDP General Screen

Click Configuration > Anti-X > IDP > General to open this screen. Use this
screen to turn IDP on or off, bind IDP profiles to traffic directions, and view
registration and signature information.
Note: You must register in order to use packet inspection signatures. See the
Registration screens.
If you try to enable IDP when the IDP service has not yet been registered, a
warning screen displays and IDP is not enabled.
Figure 429 Configuration > Anti-X > IDP > General
The following table describes the screens in this screen.
Table 160 Configuration > Anti-X > IDP > General
LABEL
General Settings
Enable
Signature
Detection
Policies
Add
ZyWALL USG 300 User's Guide
DESCRIPTION
You must register for IDP service in order to use packet inspection
signatures. If you don't have a standard license, you can register for
a once-off trial one.
Use this list to specify which IDP profile the ZyWALL uses for traffic
flowing in a specific direction. Edit the policies directly in the table.
Click this to create a new entry. Select an entry and click Add to
create a new entry after the selected entry.
Chapter 34 IDP
603