The Idp General Screen - ZyXEL Communications ZyWALL USG 300 User Manual

31.2 The IDP General Screen

Click Anti-X > IDP > General to open this screen. Use this screen to turn IDP on
or off, bind IDP profiles to traffic directions, and view registration and signature
information.
Note: You must register in order to use packet inspection signatures. See the
Registration screens.
If you try to enable IDP when the IDP service has not yet been registered, a
warning screen displays and IDP is not enabled.
Figure 373 Anti-X > IDP > General
The following table describes the screens in this screen.
Table 150 Anti-X > IDP > General
LABEL
General Settings
Enable
Signature
Detection
Policies
Priority
ZyWALL USG 300 User's Guide
DESCRIPTION
You must register for IDP service in order to use packet inspection
signatures. If you don't have a standard license, you can register for
a once-off trial one.
Use this list to specify which IDP profile the ZyWALL uses for traffic
flowing in a specific direction.
IDP policies are applied in order of priority.
Chapter 31 IDP
513