Ip Ssh Pubkey-Auth - Dell Networking 7048 Reference Manual

Command Mode
Global Configuration mode
User Guidelines
The SSH TCP port should not be set to a value that might conflict with other
well-known protocol port numbers used on this switch.
Example
The following example specifies the port to be used by the SSH server as
8080.
console(config)#ip ssh port 8080

ip ssh pubkey-auth

Use the ip ssh pubkey-auth command in Global Configuration mode to
enable public key authentication for incoming SSH sessions. To disable this
function, use the no form of this command.
Syntax
ip ssh pubkey-auth
no ip ssh pubkey-auth
Default Configuration
The function is disabled.
Command Mode
Global Configuration mode
User Guidelines
AAA authentication is independent from this configuration.
Example
The following example enables public key authentication for incoming SSH
sessions.
1610
SSH Commands