Show Interfaces Advanced Firmware - Dell Networking 7048 Reference Manual

show interfaces advanced firmware

Use the show interfaces advanced firmware command to display the firmware
revision of the PHY for a port.
Syntax
show interfaces advanced firmware
Parameter Description
Parameter
interface
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command is only applicable to 10G non-stacking interfaces.
Example
console#show interfaces advanced firmware
Port Revision Part number
-------- ----------- -----------
Te1/0/1 0x411 BCM8727
Te1/0/2 0x411 BCM8727
Te1/0/3 0x411 BCM8727
Te1/0/4 0x411 BCM8727
Te1/0/5 0x411 BCM8727
1668
System Management Commands
interface
Description
A 10G non-stacking physical interface.