Ip Telnet Server Disable; Commands In This Chapter - Dell Networking 7048 Reference Manual

Commands in this Chapter

This chapter explains the following commands:

ip telnet server disable

ip telnet port
ip telnet server disable
The ip telnet server disable command is used to enable/disable the Telnet
service on the switch.
Syntax
ip telnet server disable
no ip telnet server disable
Parameter Ranges
Not applicable
Command Mode
Global Configuration
Usage Guidelines
No specific guidelines.
Default Value
This feature is enabled by default.
Example
console#configure
console(config)#ip telnet server disable
console(config)# no ip telnet server disable
1712
Telnet Server Commands
show ip telnet
–