Show Checkpoint Statistics - Dell Networking 7048 Reference Manual

Command Mode
User EXEC or Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
No specific guidelines.
Example
console#show boot-version
unit
1

show checkpoint statistics

Use the show checkpoint statistics command to display the statistics for the
checkpointing process.
Syntax
show checkpoint statistics
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
When nonstop forwarding is enabled on a stack, the stack's management unit
checkpoints operational data to the backup unit. If the backup unit takes over
as the management unit, the control plane on the new management unit uses
the checkpointed data when initializing its state. Checkpoint statistics track
the amount of data checkpointed from the management unit to the backup
unit.
Boot Image Version
Thu Aug 30 12:01:04 2007
System Management Commands
1665