Snmp Commands; Commands In This Chapter; Show Snmp - Dell Networking 7048 Reference Manual

SNMP Commands

The SNMP component provides a machine-to-machine interface for the
PowerConnect product family. This includes the ability to configure the
network device, view settings and statistics, and upload or download code or
configuration images. The agent includes a get-bulk command to reduce
network management traffic when retrieving a sequence of Management
Information Base (MIB) variables and an elaborate set of error codes for
improved reporting to the network control station. The extensible and
advanced design of the PowerConnect SNMP makes adding remote
manageability to networked devices undemanding. The agent allows a
network control station to retrieve reports from the networked device. These
reports are based upon the defined objects in the MIB. The agent queries,
reports, and sets MIB variables based upon directions from the network
control station or upon preset conditions.

Commands in this Chapter

This chapter explains the following commands:

show snmp

show snmp engineID
show snmp filters
show snmp group
show snmp user
show snmp views
show trapflags
snmp-server community
show snmp
Use the show snmp command in Privileged EXEC mode to display the SNMP
communications status.
snmp-server community-
group
snmp-server contact
snmp-server enable traps
snmp-server engineID local
snmp-server filter
snmp-server group
snmp-server host
snmp-server location
77
snmp-server user
snmp-server view
snmp-server v3-host
–
–
–
–
–
SNMP Commands
1577