Ip Telnet Port; Show Ip Telnet - Dell Networking 7048 Reference Manual

ip telnet port

The ip telnet port command is used to configure the Telnet TCP port
number on the switch.
Syntax
port number
ip telnet port
port number — Telnet TCP port number (Range: 1–65535)
•
Default Configuration
The default value for the Telnet TCP port is 23.
Command Mode
Global Configuration
Usage Guidelines
The Telnet TCP port should not be set to a value that might conflict with
other well-known protocol port numbers used on this switch.
Example
console(config)#ip telnet port 45
console(config)#no ip telnet port

show ip telnet

The show ip telnet command displays the status of the Telnet server and the
Telnet TCP port number.
Syntax
show ip telnet
Default Configuration
This command has no default configuration.
1713
Telnet Server Commands