Bridge Aging-Time - Dell PowerConnect 6024F Command Line Interface Reference Manual

Default Configuration
By default, this setting is disabled (for example, forwarding to the port is not forbidden).
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
IGMP snooping dynamically discovers Multicast router ports. When a Multicast router port
is discovered, all the Multicast packets are forwarded to it unconditionally.
This command prevents a port to be a Multicast router port.
Example
In this example, forwarding all Multicast packets to g6 are forbidden.
Console (config)# interface vlan 2
Console (config-if)# bridge multicast forbidden forward-all add
ethernet g6

bridge aging-time

The bridge aging-time global configuration command sets the address table aging time. To restore
the default, use the no form of the bridge aging-time command.
Syntax
bridge aging-time seconds
no bridge aging-time
• seconds—Time is number of seconds. (Range: 10 - 630 seconds)
Default Configuration
300 seconds
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
In this example the bridge aging time is set to 250.
Console (config)# bridge aging-time 250
92
Address Table Commands