Bridge Aging-Time - Dell PowerConnect 3524 Cli Reference Manual

Syntax
• bridge multicast forbidden forward-all {add | remove} {ethernet interface-list | port-channel port-
channel-number-list}
• no bridge multicast forbidden forward-all
• add — Forbids forwarding all Multicast packets.
• remove — Does not forbid forwarding all Multicast packets.
• interface-list — Separates non-consecutive Ethernet ports with a comma and no spaces; a hyphen
is used to designate a range of ports.
• port-channel-number-list — Separates non-consecutive port-channels with a comma and no
spaces; a hyphen is used to designate a range of port-channels.
Default Configuration
This setting is disabled.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
• IGMP snooping dynamically discovers Multicast router ports. When a Multicast router port is
discovered, all the Multicast packets are forwarded to it unconditionally.
• This command prevents a port from becoming a Multicast router port.
Example
The following example forbids forwarding all Multicast packets to 1/e1 with VLAN 2.
Console(config)# interface vlan 2
Console(config-if)# bridge multicast forbidden forward-all add
ethernet 1/e1

bridge aging-time

The bridge aging-time Global Configuration mode command sets the Address Table aging time. Use the
no form of this command to restore the default configuration.
Syntax
• bridge aging-time seconds
• no bridge aging-time
• seconds — Time in seconds. (Range: 10 - 630 seconds)
Address Table Commands
107