Qos Commands - Dell PowerConnect 6024F Command Line Interface Reference Manual

QoS Commands

Command Group
qos
show qos
priority-queue out num-of-
queues
traffic-shape
qos wrr-queue threshold
wrr-queue bandwidth
wrr-queue
show qos interface
qos map dscp-queue
qos map tcp-port-queue
qos map udp-port-queue
wrr-queue cos-map
show qos map
qos trust (Global)
qos trust (Interface)
qos cos
qos dscp-mutation
qos map dscp-mutation
qos aggregate-policer
show qos aggregate-policer
qos map policed-dscp
class-map
show class-map
match
policy-map
show policy-map
Description
Enables quality of service (QoS) on the device and enters QoS basic or
advance mode.
Displays the QoS status.
Enables the egress queues to be expedite queues.
Sets a shaper on an egress port/queue.
Assigns the tail-drop mechanism on an egress queue and configures
the tail-drop thresholds.
Assigns Weighted Round Robin (WRR) weights to egress queues.
Defines the wrr-queue mechanism on an egress queue.
Displays interface QoS data.
Modifies the DSCP to CoS map.
Modifies the TCP-Port to DSCP table.
Modifies the UDP-Port to DSCP table.
Assigns CoS values to select one of the egress queues.
Displays all the QoS maps.
Configures the system to basic mode and the "trust" state.
Enables each port trust state while the system is in basic mode.
Configures the default port CoS value.
Modifies the DSCP to DSCP mutation map.
Modifies the DSCP values to the DSCP mutation map values.
Defines the policer parameters that can be applied to multiple traffic
classes within the same policy map.
Displays the aggregate policer parameter.
Modifies the policed-DSCP map for remarking purposes.
Creates class maps and enters the class-map configuration mode.
Displays all the class maps configured on the device.
Defines the match criterion to classify traffic.
Creates policy maps and enters policy-map configuration mode.
Displays the defined policy maps.
Mode
GC
UE
GC
IC
GC
IC
IC
UE
GC
GC
GC
GC
PE
GC
IC
IC
GC
GC
GC
UE
GC
GC
UE
MT
GC
UE
39
Command Groups