Show Ip Dvmrp Interface - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
The following table describes the fields shown in the display:
Field
Group
Source
Interface
Up time
Expiry time
State
Owner
show ip dvmrp interface
The show ip dvmrp interface user EXEC command displays DVMRP interface information.
Syntax
show ip dvmrp interface [ethernet interface-number | vlan vlan-id | port-channel number]
•
ethernet interface-number—Ethernet port number.
•
vlan vlan-id—VLAN number.
•
port-channel number—Port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Description
IP Multicast group address.
The network address that identifies the sources.
The outgoing interface.
The time since the Multicast routing information was learned by the router.
The minimum amount of time remaining before this entry is aged out. If the
state is pruned, the remaining time until the prune expires and the state reverts
to forwarding. Otherwise, the remaining time until this entry is removed from
the table.
An indication of whether the outgoing interface and next-hop represented by
this entry is currently being used to forward IP datagrams, or is currently
pruned.
The routing mechanism via which this next-hop was learned.
Multicast Routing Commands
223
Advertisement
Table of Contents
