Lacp Commands; Line Commands; Management Acl Commands - Dell PowerConnect 6024F Command Line Interface Reference Manual

LACP Commands

Command Group
lacp system-priority
lacp port-priority
lacp timeout
show lacp ethernet
show lacp port-channel

Line Commands

Command Group
line
speed
exec-timeout
terminal history
terminal history size
show line

Management ACL Commands

Command Group
management access-list
permit (management)
deny (management)
management access-class
show management access-list
show management access-class
Description
Configures the system LACP priority.
Configures the priority value for physical ports.
Assigns an administrative LACP timeout.
Displays LACP information for Ethernet ports.
Displays LACP information for a port-channel.
Description
Identifies a specific line for configuration and enters the line
configuration command mode.
Sets the line baud rate.
Configures the interval that the system waits until user input is
detected.
Enables the command history function for the current terminal session.
Defines the command history buffer size for the current terminal
session.
Displays line parameters.
Description
Defines a management access-list, and enters the access-list for
configuration.
Defines a permit rule.
Defines a deny rule.
Defines which management access-list is used.
Displays management access-lists.
Displays the active management access-list.
Mode
GC
IC
IC
PE
PE
Mode
LC
LC
LC
UE
UE
UE
Mode
GC
MA
MA
GC
PE
PE
35
Command Groups