Dot1X Single-Host-Violation - Dell PowerConnect 6024F Command Line Interface Reference Manual

• discard-shutdown — Discard frames with source addresses that are not the supplicant
address, and shut down the port.
• trap — Send SNMP traps
• seconds — Minimum time in seconds between consecutive traps. (Range: 1- 1000000
Default Configuration
Discard frames with source addresses that are not the supplicant address. No traps.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command is relevant when Multiple Hosts is disabled and the user has been successfully
authenticated
Examples
The following example uses forward action to forward frames with source addresses that are not the
supplicant address:
Console(config-if)# dot1x single-host-violation forward trap 100
show dot1x advanced
The show dot1x advanced privileged EXEC command displays 802.1x advanced features for the
device or for the specified interface.
Syntax
show dot1x advanced [ethernet interface]
• interface — Ethernet interface
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
502
802.1x Commands
)