History Size - Dell PowerConnect 6024F Command Line Interface Reference Manual

Default Configuration
The history function is enabled.
Command Mode
Line Configuration mode
User Guidelines
This command enables the command history function for a specified line. To enable or
disable the command history function for the current terminal session, use the terminal
history user EXEC command.
Example
The following example enables the command history function for telnet.
Console (config)# line telnet
Console (config-line)# history

history size

The history size line configuration command configures the command history buffer size for a
particular line. To reset the command history buffer size to the default, use the no form of this
command.
Syntax
history size number-of-commands
no history size
• number-of-commands—Number of commands that the system records in its history
buffer. (Range: 10 - 216)
Default Configuration
The default history buffer size is 10.
Command Mode
Line Configuration mode
User Guidelines
This command configures the command history buffer size for a particular line. To configure
the command history buffer size for the current terminal session, use the terminal history
size user EXEC command.
449
User Interface