Qos Commands; Qos; Show Qos - Dell PowerConnect 6024F Command Line Interface Reference Manual

QoS Commands

qos

The qos global configuration command enables quality of service (QoS) on the device and
enters QoS basic or advanced mode. Use the no form of this command to disable the QoS
features on the device.
Syntax
qos [advanced]
no qos
advanced—Enable QoS advanced mode. Advanced mode enables the full QoS
•
configuration.
Default Configuration
By default QoS is enabled in basic mode.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command. However, switching to Basic qos mode sets the
trust mode to cos.
Example
The following example shows how QoS is enabled on the device, in basic mode.
Console (config)# qos

show qos

The show qos user EXEC command displays the QoS status.
Syntax
show qos
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
285
QoS Commands