Rip Passive-Interface; Rip Auto-Send - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
User Guidelines
There are no user guidelines for this command.
Example
The following example enables RIP on IP address 100.1.1.1.
Console(config)# interface ip 100.1.1.1
Console(config-ip)# rip
rip passive-interface
The rip passive-interface interface configuration command disables the sending of routing updates
on an interface. To re-enable the sending of routing updates, use the no form of this command.
Syntax
rip passive-interface
no rip passive-interface
Default Configuration
Routing updates are sent.
Command Mode
IP Interface Configuration mode
User Guidelines
If the sending of routing updates on an interface is disabled, the particular subnet continues
to be advertised to other interfaces, and updates from other routers on that interface continue
to be received and processed.
Example
The following example disables the sending of routing updates on IP address 100.1.1.1.
Console(config)# interface ip 100.1.1.1
Console(config-ip)# rip passive interface
rip auto-send
The rip auto-send interface configuration command automatically detects if RIP information is
required to be sent on the interface. To disable the detection, use the no form of this command.
Syntax
rip auto-send
no rip auto-send
325
RIP Commands
Advertisement
Table of Contents
