Class; Show Policy-Map - Dell PowerConnect 6024F Command Line Interface Reference Manual

Example
The following example displays all policy-maps.
Console> show policy-map
Policy Map policy1
class class1
set dscp 7
Policy Map policy2
class class2
police 96000 4800 exceed-action drop
class class3
police 124000 96000 exceed-action policed-dscp-transmit

class

The class policy-map configuration command defines the traffic classification and enters the
policy-map class configuration mode. To delete the class map, use the no form of this command.
Syntax
class class-map-name [access-group acl-name]
no class class-map-name
• class-map-name—Specifies a class-map name.
• access-group—If a new class is created, the acl-name specifies the name of the access
IP/MAC list ACL.
Default Configuration
By default, no policy-map class-maps are defined.
Command Mode
Policy-map Configuration mode
User Guidelines
Use the policy-map global configuration command to identify the policy-map and to enter
Policy-map Configuration mode before using the class command. After specifying a policy-
map, a policy for new classes can be configured or a policy for any existing classes in that
policy-map can be modified. Attach the policy-map to an interface by using the service-policy
interface configuration command. Use an existing class-map to attach the classification
310
QoS Commands