VLAN Commands
vlan database
The vlan database global configuration command enters the VLAN database configuration mode.
Syntax
vlan database
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enters the VLAN database mode.
Console (config)# vlan database
Console (config-vlan)#
vlan
Use the vlan interface configuration (VLAN) command to create a VLAN. To delete a VLAN, use
the no form of this command.
Syntax
vlan {vlan-range}
no vlan {vlan-range}
•
vlan-range—A list of valid VLAN IDs to be added. List separate, non-consecutive VLAN
IDs separated by commas (without spaces); use a hyphen to designate a range of IDs.
(Range: 2 - 4063)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database mode
453
VLAN Commands