802.1X Commands - Dell PowerConnect 6024F Command Line Interface Reference Manual

802.1x Commands

Command Group
aaa authentication dot1x
dot1x system-auth-control
dot1x port-control
dot1x re-authentication
dot1x timeout re-authperiod
dot1x re-authenticate
dot1x timeout quiet-period
dot1x timeout tx-period
dot1x max-req
dot1x timeout supp-timeout
dot1x timeout server-timeout
show dot1x
show dot1x users
show dot1x statistics
dot1x auth-not-req
dot1x multiple-hosts
dot1x single-host-violation
show dot1x advanced
48
Command Groups
Description
Specifies one or more authentication, authorization and accounting
(AAA) methods for use on interfaces running IEEE802.1X.
Enables 802.1x globally.
Enables manual control of the authorization state of the port.
Enables periodic re-authentication of the client.
Sets the number of seconds between re-authentication attempts.
Manually initiates a re-authentication of all 802.1x-enabled ports or a
specified 802-1x-enabled port.
Sets the number of seconds the device remains in the quiet state
following a failed authentication attempt
Sets the number of seconds the device waits for a response to an EAP-
request/identify frame from the client before resending the request.
Sets the maximum number of times the device sends an EAP-request
frame to the client before restarting the authentication process.
Sets the number of seconds the device waits for a response to an EAP-
request frame from the client before retransmitting the request.
Sets the number of seconds the device waits for a response from the
authentication server before resending the request.
Displays 802.1x status for the device or the specified interface.
Displays active 802.1x authenticated users for the device.
Displays 802.1x statistics for the specified interface.
Enables unauthorized devices to access that VLAN.
Allows multiple hosts (clients) on an 802.1x-authorized port where the
dot1x port-control interface configuration command is set to auto.
Configures the action to be taken when a station with a MAC address
that is not the supplicant MAC address attempts to access the interface.
Displays 802.1x advanced features for the device or specified interface.
Mode
GC
GC
IC
IC
IC
PE
IC
IC
IC
IC
IC
PE
PE
PE
VC
IC
IC
PE