Show Line - Dell PowerConnect 6024F Command Line Interface Reference Manual

show line

The show line user EXEC command displays line parameters.
Syntax
show line [console | telnet | ssh]
• console—Console terminal line.
• telnet—Virtual terminal for remote console access (Telnet).
• ssh—Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the line configuration.
Console# show line
Console configuration:
Interactive timeout: 20
History: 10
Baudrate: 9600
Databits: 8
Parity: none
Stopbits: 1
Telnet configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
SSH configuration:
Interactive timeout: 10 minutes 10 seconds
History: 10
203
Line Commands