The following example displays counters for port g1.
Console# show interfaces counters ethernet g1
Port
InOctets
-------- ---------- ----------- ----------- -----------
g1
Port
OutOctets
-------- ---------- ------------ ------------ ------------
g1
FCS Errors: 0
Single Collision Frames: 0
Late Collisions: 0
Excessive Collisions: 0
Internal MAC Tx Errors: 0
Oversize Packets: 0
Internal MAC Rx Errors: 0
Received Pause Frames: 0
Transmitted Pause Frames: 0
The following table describes the fields shown in the display:
Field
InOctets
InUcastPkts
InMcastPkts
InBcastPkts
OutOctets
OutUcastPkts
OutMcastPkts
OutBcastPkts
FCS Errors
InUcastPkts InMcastPkts InBcastPkts
0
0
OutUcastPkts OutMcastPkts OutBcastPkts
0
0
Description
Counted received octets.
Counted received Unicast packets.
Counted received Multicast packets.
Counted received Broadcast packets.
Counted transmitted octets.
Counted transmitted Unicast packets.
Counted transmitted Multicast packets.
Counted transmitted Broadcast packets.
Counted frames received that are an integral number of octets in length
but do not pass the FCS check.
0
0
0
0
Ethernet Configuration Commands
145