Show Interfaces Configuration - Dell PowerConnect 6024F Command Line Interface Reference Manual

• port-channel-number—Valid port-channel trunk index.
Default Configuration
This command has no default configuration.
Command Mode
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example activates interface g9, which is disabled.
Console# set interface active ethernet g9

show interfaces configuration

The show interfaces configuration Privilege EXEC mode command displays the configuration for
all configured interfaces.
Syntax
show interfaces configuration [ethernet interface | port-channel port-channel-number | oob-
eth oob-interface]
• interface—Valid Ethernet port.
• port-channel-number—Valid port-channel trunk index.
• oob-interface—Out-of-Band Ethernet port number.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
138
Ethernet Configuration Commands