Port Jumbo-Frame; Clear Counters; Set Interface Active - Dell PowerConnect 6024F Command Line Interface Reference Manual

Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, Jumbo Frames are enabled on the device.
Console(config)# port jumbo-frame

clear counters

The clear counters user EXEC mode command clears statistics on an interface.
Syntax
clear counters [ethernet interface | port-channel port-channel-number]
• interface—Valid Ethernet port.
port-channel-number—Valid port-channel trunk index.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In the following example, the counters for interface g1 are cleared.
Console> clear counters ethernet g1

set interface active

The set interface active privileged EXEC mode command reactivates an interface that was
suspended by the system.
Syntax
set interface active {ethernet interface | port-channel port-channel-number}
• interface—Valid Ethernet port.
Ethernet Configuration Commands
137