Spanning Tree Commands - Dell PowerConnect 6024F Command Line Interface Reference Manual

snmp-server user
snmp-server group
snmp-server user
snmp-server v3-host
snmp-server filter
snmp-server v3-host
show snmp
show snmp engineID
show snmp users
show snmp groups
show snmp filters
show snmp users

Spanning Tree Commands

Command Group
spanning-tree
spanning-tree mode
spanning-tree forward-time
spanning-tree hello-time
spanning-tree max-age
spanning-tree priority
spanning-tree disable
spanning-tree cost
spanning-tree pathcost method
spanning-tree port-priority
spanning-tree portfast
spanning-tree link-type
spanning-tree bpdu
clear spanning-tree detected-
protocols
42
Command Groups
Creates or updates an SNMP server view entry.
Configures a new SNMP group or a table that maps SNMP users to
SNMP views.
Configures a new SNMP Version 3 user.
Specifies the SNMP engine ID on the local device.
Creates or updates an SNMP server filter entry.
Specifies the recipient of SNMPv3 notifications.
Displays the SNMP status.
Displays the SNMP engine ID.
Displays the configuration of views.
Displays the configuration of groups.
Displays the configuration of filters.
Displays the configuration of users.
Description
Enables spanning tree functionality.
Configures the spanning tree protocol.
Configures the spanning tree bridge forward time.
Configures the spanning tree bridge Hello Time.
Configures the spanning tree bridge maximum age.
Configures the spanning tree priority.
Disables spanning tree on a specific port.
Configures the spanning tree path cost for a port.
Configures the spanning tree default pathcost method
Configures port priority.
Enables PortFast mode.
Overrides the default link-type setting.
Defines BPDU handling when spanning tree is disabled on an
interface.
Restarts the protocol migration process on all interfaces or on the
specified interface.
GC
GC
GC
GC
GC
GC
PE
PE
PE
PE
PE
PE
Mode
GC
GC
GC
GC
GC
GC
IC
IC
GC
IC
IC
IC
GC
PE