Show Rmon Log - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
The following table describes the significant fields shown in the display:
Field
Index
Description
Type
Community
Owner
Last time sent
show rmon log
The show rmon log user EXEC command displays the RMON logging table.
Syntax
show rmon log [event]
•
event—Event index. (Range: 0 - 65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the RMON logging table.
346
RMON Commands
Description
An index that uniquely identifies the event.
A comment describing this event.
The type of notification that the device generates about this event. Can have the
following values: none, log, trap, log-trap. In the case of log, an entry is made in
the log table for each event. In the case of trap, an SNMP trap is sent to one or
more management stations.
If an SNMP trap is to be sent, it is sent to the SNMP community specified by this
octet string.
The entity that configured this event.
The time this entry last generated an event. If this entry has not generated any
events, this value is zero.
Advertisement
Table of Contents
