Spanning-Tree Forward-Time; Spanning-Tree Hello-Time - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
User Guidelines
There are no user guidelines for this command.
Example
The following example configures the spanning-tree protocol to RSTP.
Console(config)# spanning-tree mode rstp
spanning-tree forward-time
The spanning-tree forward-time global configuration command configures the spanning-tree
bridge forward time, which is the amount of time a port remains in the listening and learning states
before entering the forwarding state.
To reset the default forward time, use the no form of this command.
Syntax
spanning-tree forward-time seconds
no spanning-tree forward-time
•
seconds—Time in seconds .(Range: 4 - 30)
Default Configuration
The default forwarding-time for IEEE Spanning-tree Protocol (STP) is 15 seconds.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures spanning-tree bridge forward time to 25 seconds.
Console(config)# spanning-tree forward-time 25
spanning-tree hello-time
The spanning-tree hello-time global configuration command configures the spanning-tree bridge
hello time, which is how often the switch broadcasts hello messages to other switches.To reset the
default hello time, use the no form of this command.
370
Spanning-Tree Commands
Advertisement
Table of Contents
