Spanning-Tree Commands; Spanning-Tree; Spanning-Tree Mode - Dell PowerConnect 6024F Command Line Interface Reference Manual

Spanning-Tree Commands

spanning-tree

The spanning-tree global configuration command enables spanning-tree functionality. To disable
spanning-tree functionality, use the no form of this command.
Syntax
spanning-tree
no spanning-tree
Default Configuration
Spanning-tree is enabled.
Command Modes
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables spanning-tree functionality.
Console(config)# spanning-tree

spanning-tree mode

The spanning-tree mode global configuration command configures the spanning-tree protocol. To
return to the default configuration, use the no form of this command.
Syntax
spanning-tree mode {stp | rstp}
no spanning-tree mode
• stp—STP is supported.
• rstp—RSTP is supported.
Default Configuration
Spanning-tree protocol (STP) is supported.
Command Modes
Global Configuration mode
Spanning-Tree Commands
369