Examples
The following example displays the contents of the backup-config file.
Console# show backup-config
no spanning-tree
interface ethernet g12
ip address 12.1.1.1 255.0.0.0
exit
show bootvar
The show bootvar privileged EXEC command displays the active system image file that the device
loads at startup.
Syntax
show bootvar
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the active system image file that the device loads at startup.
Console# show bootvar
Images currently available on the FLASH
image-1active (selected for next boot)
image-2not active
Configuration and Image Files
127