Show Ip Dvmrp Route - Dell PowerConnect 6024F Command Line Interface Reference Manual

Example
The following example displays DVMRP-next-hop information.
Console# show ip dvmrp next-hop
Source
--------------- ---------
198.92.37.100/32 eth g2
The following table describes the fields shown in the display:
Field
Source
Interface
Hop Type

show ip dvmrp route

The show ip dvmrp route user EXEC command displays the Distance Vector Multicast Routing
Protocol (DVMRP) routing table contents.
Syntax
show ip dvmrp route [ip-address]
• ip-address—IP address of an entry in the DVMRP routing table.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Interface Hop Type
--------
Leaf
Description
The network address identifying the sources.
The outgoing interface.
Type is Leaf if no downstream dependent neighbors exist on the outgoing
virtual interface. Otherwise, type is Branch.
Multicast Routing Commands
227