Dell PowerConnect 6024F Command Line Interface Reference Manual page 55

Negating the Effect of Commands
For many configuration commands, the prefix keyword no can be entered to cancel the effect of a
command or reset the configuration to the default value. This guide describes the negation effect
for all applicable commands.
Command Completion
If a command is entered and it is not complete, if the command is invalid, or if some parameters of
the command are invalid or missing, the appropriate error message is displayed. This assists in
entering the correct command. By pressing the <Tab> button, an incomplete command is
entered. If the characters already entered are not enough for the system to identify a single
matching command, press "?" to display the available commands matching the characters already
entered.
Incorrect or incomplete commands are automatically re-entered next to the cursor. If a parameter
must be added, the parameter can be added to the basic command already displayed next to the
cursor. The following example indicated that the command interface ethernet requires the
parameter <port-num>.
(config)#interface ethernet
missing mandatory parameter
(config)#interface ethernet
Keyboard Shortcuts
The CLI has a range of keyboard shortcuts to assist in editing the CLI commands. The following
table describes the CLI shortcuts.
Keyboard Key
Up-arrow key
Down-arrow key
Ctrl+A
Ctrl+E
Ctrl+Z / End
Backspace key
Description
Recalls commands in the history buffer, beginning with the most recent command. Repeat the
key sequence to recall successively older commands.
Returns to more recent commands in the history buffer after recalling commands with the up
arrow key. Repeating the key sequence will recall successively more recent commands.
Moves the cursor to the beginning of the command line.
Moves the cursor to the end of the command line.
Returns back to the Privileged EXEC mode from all modes.
Moves the cursor back one space.
55
Using the CLI