show ports storm-control
The show ports storm-control privileged EXEC command displays the storm control
configuration.
Syntax
show ports storm-control [interface]
•
interface—A valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Modes
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the storm control configuration.
Console# show ports storm-control
PortBroadcast Storm control [kbyes/sec]
-------------------------------------------------------
g1
8000
g2 Disabled
g3 Disabled
show interfaces advertise
The show interfaces advertise privileged EXEC command displays information about auto
negotiation advertisement.
Syntax
show interfaces advertise [ethernet interface | port-channel port-channel-number ]
•
interface—A valid Ethernet port.
•
port-channel-number—A valid port-channel.
Ethernet Configuration Commands
149