Dell PowerConnect 6024F Command Line Interface Reference Manual page 496

Tx period:
Max req:
Supplicant timeout:
Server timeout:
Session Time (HH:MM:SS): 08:19:17
MAC Address:
Authentication Method:
Termination Cause: Supplicant logoff
Authenticator State Machine
State:
Backend State Machine
State:
Authentication success:
Authentication fails:
The following table describes the significant fields shown in the display:
Field
Port
Admin mode
Oper mode
Reauth Control
Reauth Period
Username
Quiet period
Tx period
496
802.1x Commands
30 Seconds
2
30 Seconds
30 Seconds
00:08:78:32:98:78
Remote
HELD
IDLE
9
1
Description
The port number.
The port admin mode. Possible values are: Force-auth, Force-unauth,
Auto.
The port oper mode. Possible values are: Authorized, Unauthorized or
Down.
Reauthentication control.
Reauthentication period.
The username representing the identity of the Supplicant. This field
shows the username in case the port control is auto. If the port is
Authorized, it shows the username of the current user. If the port is
unauthorized it shows the last user that was authenticated successfully.
The number of seconds that the device remains in the quiet state
following a failed authentication exchange (for example, the client
provided an invalid password).
The number of seconds that the device waits for a response to an
Extensible Authentication Protocol (EAP)-request/identity frame from
the client before resending the request.