Router Ospf Redistribute Static - Dell PowerConnect 6024F Command Line Interface Reference Manual

User Guidelines
If your network contains other routers that do not run OSPF, but do run RIP routing
protocols, the OSPF process can incorporate those routes learned via RIP. When
redistribution is enabled, the router becomes an "AS Boundary Router" (ASBR).
OSPF is more robust and converges more rapidly than RIP. Re-distribution of RIP routes
should be used with care to avoid network instability. Redistribution should be done only in
one direction. If RIP routes are redistributed into OSPF, do not redistribute the same OSPF
networks back into RIP.
Example
The following example enables route advertisements learnt by RIP while running OSPF.
Console (config)# router ospf redistribute rip

router ospf redistribute static

The router ospf redistribute static global configuration command enables advertising routes,
configured statically, in the OSPF routing process. To disable static route advertising, use the no
form of this command.
Syntax
router ospf redistribute static
no router ospf redistribute static
Default Configuration
Statically configured route advertising is disabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example enables route advertisements statically configured while running OSPF.
Console (config)# router ospf redistribute static
235
OSPF Commands