Show Ip Mroute-Next-Hop - Dell PowerConnect 6024F Command Line Interface Reference Manual

show ip mroute-next-hop

The show ip mroute-next-hop user EXEC command displays IP Multicast routing next hop
information.
Syntax
show ip mroute-next-hop [group group-address] [source source-address]
group group-address—Multicast group IP address.
•
source source-address—The source IP address.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays Multicast next hop information.
Console# show ip mroute-next-hop
Group
------------------------------------------------------------
224.0.255.1
224.0.255.1
224.1.255.1
224.1.255.1
222
Multicast Routing Commands
Source Interface
198.92.37.100/32 eth g2
199.92.37.100/32 eth g2
198.92.37.100/32 eth g2
199.92.37.100/32 eth g2
Up Time Expiry Time
20:20:00 0:02:55
1:4d:20m 0:02:55
21:20:00 0:02:55
1:4d:20m 0:02:55
State Owner
Forward igmp
Forward igmp
Forward dvmrp
Forward dvmrp