Ssh Commands; Ip Ssh Port; Ip Ssh Server - Dell PowerConnect 6024F Command Line Interface Reference Manual

SSH Commands

ip ssh port

The ip ssh port global configuration command specifies the port to be used by the SSH server. To
use the default port, use the no form of this command.
Syntax
ip ssh port port-number
no ip ssh port
• port-number—Port number for use by the SSH server (Range: 1 - 65535).
Default Configuration
The default value is 22.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies the port to be used by the SSH server as 8080.
Console (config)# ip ssh port 8080

ip ssh server

The ip ssh server global configuration command enables the device to be configured from a SSH
server. To disable this function, use the no form of this command.
Syntax
ip ssh server
no ip ssh server
Default Configuration
This default is SSH is enabled.
Command Mode
Global Configuration mode
401
SSH Commands