Dell PowerConnect 6024F Command Line Interface Reference Manual page 221

Command line interface (cli) guide (.htm)
Hide thumbs Also See for PowerConnect 6024F:
Table of Contents

Advertisement

The following example displays all ip mroutes for port g1.
Console# show ip mroute ethernet g1
Group
Source
----------- ------------------
224.0.255.1
198.92.37.100/32
224.0.255.1
199.92.37.100/32
224.1.255.1
198.92.37.100/32
224.1.255.1
199.92.37.100/32
The following example displays all ip mroutes for group 224.1.255.1.
Console# show ip mroute group 224.1.255.1
Group
Source
----------- -------------------- -------------- ----------- --------
224.1.255.1
198.92.37.100/32
224.1.255.1
199.92.37.100/32
The following table describes the fields shown in the display:
Field
Group
Source
Upstream
Interface
Up time
Expiry time
Owner
Upstream
------------
10.20.37.33
10.20.37.33
10.20.37.33
10.20.37.33
Upstream
10.20.37.33
10.20.37.33
Description
IP Multicast group address.
The network address that identifies the sources.
The upstream neighbor (RPF) address from which IP datagrams from these
sources, to this Multicast address are received.
The IP interface on which IP datagrams sent by these sources to this
Multicast address are received.
The time since the Multicast routing information was learned by the router.
The minimum amount of time remaining before this entry is aged out.
The Multicast routing protocol via which this Multicast forwarding entry was
learned.
Interface
Up Time
---------
--------
eth g1
20:20:00
eth g1
1d:4h:20m dvmrp
eth g1
21:20:00
eth g1
1d:5h:20m dvmrp
Interface Up Time
eth g1
21:20:00
eth g1
1d:5h:20m dvmrp
Multicast Routing Commands
Owner
------
dvmrp
dvmrp
Owner
--------
dvmrp
221

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect 6024

Table of Contents