Dell PowerConnect 6024F Command Line Interface Reference Manual page 52
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
Interface Configuration Mode and Specific Configuration Modes
Interface configuration modes are used to modify specific interface operations. The following are
the Interface Configuration modes:
•
Line Interface—Contains commands to configure the management connections. These
include commands such as line speed, timeout settings, etc. The Global Configuration mode
command line is used to enter the line configuration command mode.
•
VLAN Database—Contains commands to create a VLAN as a whole. The Global
Configuration mode command vlan database is used to enter the VLAN Database Interface
Configuration mode.
•
Management Access List—Contains commands to define management access-lists. The
Global Configuration mode command management access-list is used to enter the
Management Access List Configuration mode.
•
Policy-map Class—Contains commands to configure QoS packet properties. The overall set
of classification rules and their corresponding action (meter, security) are assigned to a
specific port. The Global Configuration mode command policy-map class is used to enter the
Policy-map Class Configuration mode.
•
Ethernet—Contains commands to manage port configuration. The Global Configuration
mode command interface ethernet enters the Interface Configuration mode to configure an
Ethernet type interface.
•
Port Channel—Contains commands to configure port-channels, for example, assigning ports
to a VLAN or port-channel. Most of these commands are the same as the commands in the
Ethernet interface mode, and are used to manage the member ports as a single entity. The
Global Configuration mode command interface port-channel is used to enter the port-
channel Interface Configuration mode.
•
Class-Map—Contains commands to define a class map. Class maps consists of ACLs which
define the matching criteria for determining a frames accessibility to the system. The Global
Configuration mode command class-map is used to enter the Class-map Configuration
mode.
•
SSH Public Key-chain—Contains commands to manually specify other device SSH public
keys. The Global Configuration mode command crypto key pubkey-chain ssh is used to enter
the SSH Public Key-chain Configuration mode.
•
IP Access-List—Contains commands to create and manage access lists. The Global
Configuration mode command ip access-list is used to enter the IP access-list configuration
mode.
•
MAC Access-List—Configures conditions required to allow traffic based on MAC addresses.
The Global Configuration mode command mac access-list is used to enter the MAC access-
list configuration mode.
•
Key—Identifies a routing protocol authentication key. The Global Configuration mode
command key (global) is used to enter the key configuration mode.
52
Using the CLI
Advertisement
Table of Contents
