Map Protocol Protocols-Group; Switchport General Map Protocols-Group Vlan - Dell PowerConnect 6024F Command Line Interface Reference Manual

map protocol protocols-group

The map protocol protocols-group VLAN database command adds a special protocol to a named
group of protocols, which may be used for protocol-based VLAN assignment. To delete a protocol
from a group, use the no form of this command.
Syntax
map protocol protocol [encapsulation] protocols-group group
no map protocol protocol encapsulation
• protocol—The protocol is a protocol number or one of the reserved names. The format is
Hex format.
• encapsulation—One of the following values: ethernet, rfc1042, llcOther. If no option is
indicated the default is ethernet.
• group—Group number of group of protocols associated together.
(Range: 1 - 2147483647)
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database mode
User Guidelines
The following protocol names are reserved:
• ip-arp
• ipx
Example
The following example maps protocol ip-arp to the group named "213".
Console (config)# vlan database
Console (config-vlan)# map protocol ip-arp protocols-group 213

switchport general map protocols-group vlan

The switchport general map protocols-group vlan interface configuration command sets a
protocol-based classification rule. To delete a classification, use the no form of this command.
Syntax
switchport general map protocols-group group vlan vlan-id
no switchport general map protocols-group group
463
VLAN Commands