Show Vlan - Dell PowerConnect 6024F Command Line Interface Reference Manual
Command
line interface (cli) guide (.htm)
Hide thumbs
Also See for PowerConnect 6024F:
- User manual (474 pages) ,
- Getting started manual (66 pages) ,
- Getting started manual (154 pages)
Table of Contents
Advertisement
•
group—Group number as defined in the map protocol protocols-group command.
(Range: 1 - 2147483647)
•
vlan-id—Define the VLAN ID in the classifying rule.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets a protocol-based classification rule of protocol group 1 to VLAN 8.
Console (config)# interface ethernet g8
Console (config-if)# switchport general map protocols-group 1 vlan
8
show vlan
The show vlan privileged EXEC command displays VLAN information.
Syntax
show vlan [tag vlan-id | name vlan-name]
•
vlan-id—A valid VLAN ID
•
vlan-name—A valid VLAN name string. (Range: 1 - 32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays all VLAN information.
464
VLAN Commands
Advertisement
Table of Contents
