The T1/E1 Menu - Alcatel Omni Switch/Router User Manual

The T1/E1 Menu

The commands for configuring and monitoring
submenu. This submenu displays as shown below and may be accessed (when in verbose
mode) by entering
The commands in this menu are described in the following sections. The first command,
displays configuration information on ports. This configuration information is configured
through the command. The remaining commands, listed after the
provide a variety of interval statistics for local and remote
The
only to the OmniAccess 408 and 512. For the Omni
Switch/Router, these are nonfunctioning commands.
at a system prompt.
o Note o
, , , and
and ports are contained in the
T1 E1
and connections.
T1 E1
commands apply
The T1/E1 Menu
,
command
Page 33-3