Your First Login Session
Once the switch or stack has successfully booted and you have
accessed your computer's terminal emulation software via the
console port, you are ready to log in to the switch's Command
Line Interface (CLI) and configure basic information.
Important. If you are using OmniSwitch 6600 Family
switches in a stacked configuration, you must be
connected to the console port of the stack's primary
switch. For detailed information on primary switch status,
refer to the Hardware Users Guide.
In order to complete the setup process for the switch or stack,
you should complete the following steps during your first
login session:
Log in to the switch
•
Unlock session types
•
Change the login password
•
Set the date and time
•
Set optional system information
•
Save your changes
•
32
Your First Login Session
Note. You must be connected to the switch via the console
port before initiating your first login session.
Logging In to the Switch
When you first log in to the switch, you will be prompted for a
login (i.e., user) name and password. During this first login
session, only one user name option and one password option is
available:
Login (i.e., user name)—admin
•
Password—switch
•
To log in to the switch, enter admin at the login prompt:
login: admin
Next, enter the factory default password, switch, at the
password prompt:
password: switch
March 2005