Rack-Mounted Installation Procedure - ZyXEL Communications NXC5200 User Manual

Chapter 1 Introduction
Use a #2 Phillips screwdriver to install the screws.
Note: Failure to use the proper screws may damage the unit.

1.2.1 Rack-Mounted Installation Procedure

Align one bracket with the holes on one side of the NXC and secure it with the
1
included bracket screws (smaller than the rack-mounting screws).
Attach the other bracket in a similar fashion.
2
After attaching both mounting brackets, position the NXC in the rack by lining up
3
the holes in the brackets with the appropriate holes on the rack. Secure the NXC
to the rack with the rack-mounting screws.
26
NXC5200 User's Guide