Edit Ap List - ZyXEL Communications NXC5200 User Manual

Hide thumbs Also See for NXC5200:

Table of Contents

Chapter 10 Wireless

10.3.1 Edit AP List

Select an AP and click the Edit button in the Configuration > Wireless > AP

Management table to display this screen.

Figure 64 Configuration > Wireless > Edit AP List

Each field is described in the following table.

Table 57 Configuration > Wireless > Edit AP List

Radio 1 OP Mode

Use this menu to create a new Radio or SSID object to associate

with this AP.

This displays the MAC address of the selected AP.

This field displays the AP's hardware model information. It displays

"N/A" (not applicable) only when the AP disconnects from the NXC

and the information is unavailable as a result.

Enter a description for this AP. You can use up to 31 characters,

spaces and underscores allowed.

Select the operating mode for radio 1.

AP Mode means the AP can receive connections from wireless clients

and pass their data traffic through to the NXC to be managed (or

subsequently passed on to an upstream gateway for managing).

MON Mode means the AP monitors the broadcast area for other APs,

then passes their information on to the NXC where it can be

determined if those APs are friendly or rogue. If an AP is set to this

mode it cannot receive connections from wireless clients.

NXC5200 User's Guide

Nxc5200 - v2.20