Wireless Frame Capture - ZyXEL Communications NXC5200 User Manual

Chapter 36 Diagnostics

36.4 Wireless Frame Capture

Use this screen to capture wireless network traffic going through the AP interfaces
connected to your NXC. Studying these frame captures may help you identify
network problems.
Click Maintenance > Diagnostics > Wireless Frame Capture to display this
screen.
Note: New capture files overwrite existing files of the same name. Change the File
Suffix field's setting to avoid this.
Figure 253 Maintenance > Diagnostics > Wireless Frame Capture > Capture
The following table describes the labels in this screen.
Table 204 Maintenance > Diagnostics > Wireless Frame Capture > Capture
LABEL
MON Mode APs
Configure AP to
MON Mode
Available MON
Mode APs
Capture MON
Mode APs
Misc Setting
536
DESCRIPTION
Click this to go the Configuration > Wireless > AP
Management screen, where you can set one or more APs to
monitor mode.
This column displays which APs on your wireless network are
currently configured for monitor mode.
Use the arrow buttons to move APs off this list and onto the
Captured MON Mode APs list.
This column displays the monitor-mode configured APs selected to
for wireless frame capture.
NXC5200 User's Guide